t: 0800 298 8010
 
Departments

Information


Login
Username:
Password:

Bluetooth Gateways


GSM Gateway |  Bluetooth Gateways


A Bluetooth Gateway is a device that does not contain it's own GSM engine. It connects to a mobile phone using Bluetooth and provides an analogue or VoIP Interface. This means that it will not go out of date as SIM technology or mobile phone networks are updated. You could start to use this gateway with a standard 2G SIM Card / Mobile phone and then use with a 3G SIM Card Mobile Phone at a later date if you had a better deal on another network.

The Gempro GP-510 will connect to a single mobile phone via Bluetooth and provide an analogue interface to connect to a standard analogue telephone or to the analogue trunk port of a phone system.

The Gempro GP-710 will connect to a single mobile phone via Bluetooth and provide a VoIP interface to connect to a VoIP PBX as a SIP Trunk.

Gempro GP-510 Bluetooth Gateway for Analogue
Gempro GP-510 Bluetooth Gateway for Analogue Gempro GP-510 Bluetooth Gateway to connect to analogue telephone or analogue trunk of phone system to enable calls to be made using any bluetooth mobile phone.
Gempro GP-710 Bluetooth Gateway for VoIP
Gempro GP-710 Bluetooth Gateway for VoIP Gempro GP-710 Bluetooth Gateway for connection to VoIP Phone System to enable calls to be made using any Bluetooth Mobile Phone.
Gempro GP-510 Bluetooth Gateway - GP-510 Analogue to Bluetooth Gateway Gempro GP-510 Bluetooth Gateway - GP-510 Analogue to Bluetooth Gateway Ref: Gempro GP-510

GP-510 uses Bluetooth to connect Bluetooth mobile phone with common telephone or PBX.It makes immediately PBX has a trunk by mobile phone to transmit.It is not only far away the electromagnetic wave, but also unnecessary to change user’s habit of using the table phone. It is a trunk of mobile to mobile, and it also saves expenses.



Gempro GP-510 Features:

- PBX/phone Bluetooth Mobile Voice is transmitted on the trunk by mobile phone.
- GP-510 pairs to Bluetooth mobile phone to use directly, it doesn’t relate to telecommunication provider and frequency.
- Just use phone to dial, it can be far away the electromagnetic wave.
- Speed Dial Function.
- The calling will pass to PSTN automatically when power down, mobile phone is unpaired or out of range.
- Volume of digitization and it adjusts volume and gains.
- Set local code and automatically add code, and user isn’t necessary to change habit of using the table phone.
- Bluetooth has functions of pairing and searching automatically.
- Transmit high quality voice.
- It is compatible with GSM/CDMA/3G/3.5G Bluetooth mobile phone.
- Phone(PBX) can dial out and answer Skype. (Dongle & API have to support VoIP)
- 100 sets phone book Speed Dial & memorize
- Don't change the dialing habit to skype out

Gempro GP-510 Bluetooth Gateway Specification

- Metering Signals: 12KHz, 16KHz,Polarity Reversal,Tone
A/D ,D/A : G.711:PCM Mode
- DTMF : Detect & Generator
- Caller ID Format: DTMF
- Tone Programmable: Dial Tone & Busy Tone
- Power : AC110/220V 50/60HZ

Bluetooth:
- Bluetooth Specification V2.
- Carrier Frequency 2400MHz to 2483.5MHz( USA , Spain ,France)
- Modulation Method GFSK,1Mbps,0.5BT Gaussian
- Output level, class 2
- 10 meters working range



Quantity:   OUT OF STOCK - call for availability


£145.00 (£166.75 Including VAT at 15%)
Gempro GP-710 Bluetooth Gateway - GP-710 VoIP to Bluetooth Gateway Gempro GP-710 Bluetooth Gateway - GP-710 VoIP to Bluetooth Gateway Ref: Gempro GP-710

The Gempro GP-710 is a revolutionary and innovative product. It Integrates VoIP and 2.4G Bluetooth technologies in a single device, this not only offers cost-effectiveness in mobile communications for mobile users, but also offeres long term flexibility with regard to using different mobile phone networks and technologies.







Specification:
VoIP
Web Browser
IVR Interface
Uplink Route Setting
Downlink Setting
1 Stage, Dialout Called, Free Dial

Network Protocol:
SIP v1 (RFC2543), v2(RFC3261)
IP/TCP/UDP/RTP/RTCP
IP/ICMP/ARP/RARP/SNTP
DHCP Client/ PPPoE Client
DNS Client

CODEC:
GSM
G.711: 64k bit/s (PCM)
G.723.1: 6.3k / 5.3k bit/s
G.726: 16k / 24k / 32k / 40k bit/s (ADPCM)
G.729A: 8k bit/s (CS-ACELP)
G.729B: adds VAD & CNG to G.729

NAT Traversal:
STUN

Voice Quality:
VAD: Voice activity detection
CNG: Comfortable noise generator
LEC: Line echo canceller
Packet Loss Compensation
Adaptive Jitter Buffer

Bluetooth:
Bluetooth Specification V2.
Carrier Frequency 2400MHz to 2483.5MHz( USA , Spain ,France)
Modulation Method GFSK,1Mbps,0.5BT Gaussian
Output level, class 2
10 meters working range


Quantity:   OUT OF STOCK - call for availability


£165.00 (£189.75 Including VAT at 15%)

GSM Gateway |  Bluetooth Gateways

Valid CSS!